BRASS GATE VALVE

Brass Gate Valve

Quick Overview

Featuring brass construction and twist handle operation, gate valves are designed to control water flow, allowing water isolation and pipes/taps to be shut off at the point of the gate valve.

INQUIRY

DESCRIPTION

ADDITIONAL INFORMATION

Nominal Pressure PN16

Working Medium Water, Oil, Gas

Working Temprature t≤170̊ C

Material Brass

DATA SHEET

Brass Gate valve are suitable to control water flow, allowing water isolation and pipes/taps to shut off at the point of the gate valve.

Application

Widely suitable in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc.

Feature

Female threaded ends;
Threaded bonnet;
Integral seat;
Adjustable packing nut;
Non-rising stem;
Solid wedge disc;
Working Medium: Suitable for water, oil, gas, etc.

Gate Valve Installation

Make sure all surfaces are clear and free of debris on the piping connection.
Use Teflon tape or any sealant with approval.
Prepare two smooth-jawed adjustable wrenches when installing the valve. A loosely fitting pipe wrench can distort the valve and causes a leak.
Apply one wrench on the hex nearest the tightening joint to prevent breaking the seal between the end cap and body of the valve.

Maintenance

Screw the packaging gland properly when leakage occurs stem and to tighten in 1/8 to 1/4 turn increments until leak stops.

Caution

Do not disassemble valve while under pressure nor with entrapped hazardous fluids therein.

General Information

Gate valves are designed for fully open or fully close service. They are installed in pipelines as isolating valves, and should not use them as control or regulating valves. Operation of a gate valve is performed doing an either clockwise to close (CTC) or clockwise to open (CTO) rotating motion of the stem. When operating the valve stem, the gate moves up- or downwards on the threaded part of the stem.

Our economy gate valves are particularly perfect for starting/shutting off flow . Also there are a number of sizes available on request. The gate valves are ideal within fuel and water installations, and are suitable for use with diesel, oil and water.

In addition, Our diverse range of Valves provides you with the ultimate solution to control the flow and pressure within a system or process. They are essential components of a piping system. They regulate, control, or direct the flow of a fluid by opening, closing, or partially obstructing fluid flow. Our exclusive valves include a variety of gate, ball, and check valves as well as flow control valves to fulfill your requirements. Moreover, we can supply valves in a wide range of materials.